Masters

Welcome to “Masters of Sheet Metal”! Here you will find stories about people who do truly masterful work in sheet metal and who are committed to solutions, performance and products associated with processing sheet metal.

  • Bruno Vogelsang: Plenty of heart and soul … and a good cup of coffee
    Hans Wagner: Two generations at work
  • Nathan Howard: “If only everything worked just this perfectly!”
    Holger Klein: Modern networkers
  • Greg Driscoll: The peaks of production
    Michael Lerch: “Our tube processing makes us special”
  • Roland Deeg: Not without our robot
    Martin Krämer: Through thick and thin with the solid-state laser
  • Franz Biegert: A slender star for every purpose
    Johann Hochstöger: Perfect production
  • Tobias Richter: “Passion is part of the deal”
    Sam Kusack: At the peak
  • Johann Bürger: The development aids
    Markus Mauer: A shining example
  • Pablo Vicent Pereira Motta: Grand entrance
    Manfred Wujesch: A twin pack for bending small parts
  • José Rubens de la Rosa: Grand entrance
    Erich Ludwig jr.: Lights out, diodes on
  • Michael Knottek: Over 50
    Georg Mauser: Tradition and innovation with sheet metal processing of the future
  • Clinton Howe: Thick sheet, cut nimbly
    Dietmar Röhrle: Back to the roots
  • Andrea Zampar: Think big!
    Gilles Martinez: From shed to factory
  • Martin Krämer: Steel instead of stalls
    Holger Lendner: What you will
  • Thorsten Seeger: “CO<sub>2</sub> and solid-state lasers complement each other – and lend us flexibility”
    Christoph Siegl: Making short work of it
  • Samuel Roth: Exact trimming for drywall studs
    Ludger Meier: “We followed  the parts”
  • Dr. Michael Rohwerder: A healer of metals
    Friedrich Brotzeller: A shining example
  • Martin Stamm: “Now we’re twice as fast”
    Günter Peters: From one to a hundred
  • „Geggs“ Martin: Working in the sky
    Christel Schreiber: Like father, like daughters
  • Wu Chung-Hsien: Totally happy
    Brian Amacher: Powering up the world
  • Marjan Volpe: Sheet metal from the Balkans
    Günter Schink: Everything’s OK!
  • Frank Röhrle: Back to the roots
    Armin Renz: briefkasten.de
  • Chen Hui-Wen: Totally happy
    Hans-Dieter Gugel: A clean solution for laser production
  • Walter Zwicklhuber: Quick and reliable
    Almir Ciarrocchi: Grand entrance
  • Jürgen Bickel: Bickel’s got it down pat
    Julián Jiménez Cándano: Removing the Element of Chance
  • Kwang Young Choi: The Shin Sung principle
    Thomas Claaßen: Sheet metal maker and team player
  • Wilhelm Kuipers: “No excuses”
    Johannes Weiser: The development aids
  • Jürgen Gerst: A team for volume production
    Trinh Van Ha: Strong will
  • Marilyn Spreet: From metal sculptures to metal fabrication
    Ferdinand Hein: “We learn the most at night”
  • Darrel Bishop: Sheet metal instead of milk
    Jürgen Schröder: Thick sheet, cut nimbly
  • Alan Spreet: From metal sculptures to metal fabrication
    Florian Friedrich: Specialist and all-rounder
  • Marcel Ferreira: “We keep the customer in mind”
    Masakatsu Matsuo: “Two processes, one laser — that makes for productivity”
  • Goran Sutalo: Sheet metal from the Balkans
    Roger Willems: On Tour
  • Wolfgang Schuppler: “The Perfect Cut”
    Vaclav Kriz: Something’s brewing at Sinop
  • Rick Dahl: Powering up the world
    Gabriel Pausch: Thinking ahead
  • Reinhard Seiler: Builder makes his mark with quality
    Florian Meier: “We followed  the parts”
  • Lise Baker: The flexibility to adapt
    Markus Hermann: Great acceleration
  • Hermann Schickling: Power for heavy sheet metal
    Jim Koberg: Powering up the world
  • Jörg Oberschmidt: Playing it safe
    Sarayut Pisolpool: Fashionable furniture
  • Patrik Gugel: A clean solution for laser production
    Per-Olof Björnsson: „Det ser ganska ljust ut“
  • Michael Kohlmann: A shining example
    Nusret Kanat: In the fast Lane
  • Wolfgang Knottek: Over 50
    Melanie Bickel: Bickel’s got it down pat
  • André Visser: High technology on the Western Cape
    Roland Kiefer: Down to earth
  • Brian Hayes: Modern heirlooms
    Nils Clausen: Venue creator
  • Achim Dittrich: “Our firm has a broad stance”
    Jeff Cartier: Changing ways and expanding horizons
  • To Van Nghiep: Strong will
    Sven Kölbel: “This layer is well worth it”
  • Tristan Opie: No risk, no gain
    Jürgen Schanz: Sharp-edged beauties
  • Jack Percival.: Lower stress, higher productivity
    Miroslaw Gucfa: Taking a dive
  • Martina Kammann: Promoting ideas
    Dr. Manuel Metz: The Space Ranger
  • Werner Neumann: Unconventional and successful
    Jordi Batlle: Always ready to listen
  • Mark Fairchild: On top of the world
    Volker Simon: Two generations at work
  • Jürg Ludwig: Curves for custom Harleys
    Viola Hermann: Metalworker
  • Walter Gamerdinger: An artisan in tone
    Omar Rojas: Rust and dreams
  • Harald Keller: “I don’t want a flash in the pan”
    Niklas Tjäder: „Det ser ganska ljust ut“
  • Stephan Schlömer: Perfectly happy
    Giuseppe Pasquarella: Parts by the thousand
  • Sigrid Deeg: Not without our robot
    Tudor Muresan: A strong team
  • Nelson Gehrke: Rapid transit in Brazil
    Martin Kälberer: Magic moments
  • Pilar Batlle: Always ready to listen
    Gosia Warrink: Multi-facetted designer
  • Uwe Distler: The railway expert
    Pascal Martinez: From shed to factory
  • Brenna Fairchild: On top of the world
    Hakan Yaman: In the fast Lane
  • Greg Claycomb: Show me the edge
    Dan Moore: Creative minds
  • Otto May: Specialist and all-rounder
    Ömer Arabacı: In the fast Lane
  • Waldemar Makowski: “We followed  the parts”
    Stephan Schink: Everything’s OK!
  • Elizabeth Titton: Symbols of water
    Ludwig Schopf: What you will
  • Stefan Siegl: Making short work of it
    Frank Steinhart: Shaping up
  • Michael Knake: Highly diversified
    Ingemar Ronger: „Det ser ganska ljust ut“
  • Julián Jiménez: Removing the Element of Chance
    Andreas Knottek: Over 50
  • Rolf Schages: Thick sheet, cut nimbly
    Matthias Hillemeier: A twin pack for bending small parts
  • Ge Guan Hao: “We all pursue the same goals”
    Alejandro Salazar: Rust and dreams
  • Marcelo Facchini: Grand entrance
    Dirk Matyssek: Expansive
  • Jacques Kammerer: They know what they’re doing
    Keith Chadwick: It holds and holds and holds …
  • Uwe Arnold: “If it’s easy, then others can do it”
    Benny Gustafsson: „Det ser ganska ljust ut“
  • Buntoro Setiomulyo: “We want people to love us.”
    Thomas Steffen: “An idea won’t necessarily be successful just because it’s good”
  • Katja Hof: Female, 36, managing director
    Sander Mutsaers: All or nothing
  • Matthias Weyer: Master builder
    Jan-Peter Höhne: One objective — many options
  • Eduald Batlle: Always ready to listen
    Kittisak Yokubon: Made in Thailand
  • Oliver Secker: Tradition and innovation with sheet metal processing of the future
    Egidio Maschio: “I personally guarantee every component”
  • Kutlu Sahin: In the fast Lane
    Wolfgang Jetter: “The Perfect Cut”
  • Ernst Hutterer: Perfect production
    Günter Hommel: Applying pressure
  • Kwak Yun Chon: The slenderizer
    Frank Dreger: The hard metal tamer
  • Thomas Herberger: A machine that grows to meet new challenges
    Jan Oortgiesen: A fast space saver